BMW M6GT3 1st Spa 24hrs 2016 #98/99 Rowe Racing1:24 by NuNu
BMW M6GT3 1st Spa 2016 1:24
Accessory set available NUN24001
Platz is a new name to us, although some aircraft and armour modellers may recognise them, and for this first 1:24 car release they have worked together with Beemax. The kit design is for a kerbside model but there is still plenty of detail included for the cockpit and a fair amount for the suspension and chassis, although the latter will be fairly well hidden when completed. Each window section is a separate piece, which will simplify the application of the decals which are included for the frames and the position marker light to go in the front screen. A few plated parts are provided for the light backings but do not included the grille insert, the outer edge of which will need a chrome finish of some sort. The decals are clearly printed and offer either the winning #99 machine of Eng, Sims and Martin or the sister #98 machine whish finished well down the running, with clearly printed and correct sponsorship and the various grey and yellow stripes. The decals also have the seat belts on and you may wish to upgrade these and a few other small parts with the additional detailing set which is, for some reason, marketed under the NuNu brand. This has etch for the seat belt buckles, the driver protection netting, various fasteners inside and out, grilles, wipers, brake facings, replacement supports and end-plates for the rear wing. Along with the etched parts, there a few small machined pieces and three sheets of templated carbon decal too.
Description: | BMW M6GT3 1st Spa 24hrs 2016 #98/99 Rowe Racing1:24 |
Catalogue#: | PLZPN24001 |
Product Type: | Plastic Kit |
Scale: | 1:24 |
Event: | Spa 24hrs, GT & Sports Car Racing |
Colour: | - |
Drivers: | Catsburg, Werner, Dusseldorp, Sims, Eng, Martin |
Sponsors: | #98, 99, Rowe Racing |
Dates: | 2016 |
Race/Position: | Winner |
Release Date: | November 2018 |
Weight: | 650 grams |
Comments: | - |
About NuNu
Partner brand for the excellent Beemax range of 1:24 rally and touring car plastic kits. Well proportioned and engineered plastic kits. Rally and touring car subjects usually kerbside but with decent chassis and suspension detail. F1s have removable panels, full chassis, engine etc. Optional detailing sets include etch and templated carbon decal where applicable and placement for these parts is included in the main instructions. Made in China.